Duplo DPS510 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Duplo DPS510 Top Searches

These results are ranked by popularity.

Error
E018Description: FPGA Write /readout to FPGA of the main PCB is defective.
E001Description: Main motor locked During the main motor rotation, the main motor encoder sensor does not detect the edge for 0.1 second.
E020Description: Tape cluster cutter motor locked Tape cutting is defective.
E002Description: Elevator motor locked While the elevator is moving up, the elevator top limit sensor does not pass light within 30 seconds. While the elevator is moving down, the elevator lower limit switch does not turn on within 30 seconds.
E021Description: Communication with the tape cluster is not performed normally Communication between the main PCB and the tape cluster PCB is defective.

Duplo DPS510 Common Errors

The most common error codes.

Error
E018Description: FPGA Write /readout to FPGA of the main PCB is defective.
E001Description: Main motor locked During the main motor rotation, the main motor encoder sensor does not detect the edge for 0.1 second.
E020Description: Tape cluster cutter motor locked Tape cutting is defective.
E002Description: Elevator motor locked While the elevator is moving up, the elevator top limit sensor does not pass light within 30 seconds. While the elevator is moving down, the elevator lower limit switch does not turn on within 30 seconds.
E021Description: Communication with the tape cluster is not performed normally Communication between the main PCB and the tape cluster PCB is defective.
E018Description: FPGA Write /readout to FPGA of the main PCB is defective.
E001Description: Main motor locked During the main motor rotation, the main motor encoder sensor does not detect the edge for 0.1 second.
E020Description: Tape cluster cutter motor locked Tape cutting is defective.
E002Description: Elevator motor locked While the elevator is moving up, the elevator top limit sensor does not pass light within 30 seconds. While the elevator is moving down, the elevator lower limit switch does not turn on within 30 seconds.
E021Description: Communication with the tape cluster is not performed normally Communication between the main PCB and the tape cluster PCB is defective.