These results are ranked by popularity.
Error | |
---|---|
59 | Description: Incompatible option or tray. |
200.x5 | Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens |
964.xx | Description: Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file. |
242.x4 | Description: 242.24 Paper fed from tray 2 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earlier than expected 242.34 Paper fed from tray 3 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earli |
110 | Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33 |
The most common error codes.
Error | |
---|---|
59 | Description: Incompatible option or tray. |
200.x5 | Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens |
964.xx | Description: Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file. |
242.x4 | Description: 242.24 Paper fed from tray 2 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earlier than expected 242.34 Paper fed from tray 3 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earli |
110 | Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33 |
59 | Description: Incompatible option or tray. |
200.x5 | Description: 200.05 Paper fed from the MPF never cleared the sensor (input). 200.15 Paper fed from tray 1 never cleared the sensor (input). 200.25 Paper fed from tray 2 never cleared the sensor (input). 200.35 Paper fed from tray 3 never cleared the sens |
964.xx | Description: Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file. |
242.x4 | Description: 242.24 Paper fed from tray 2 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earlier than expected 242.34 Paper fed from tray 3 cleared the sensor (tray 2 pass-through) or the sensor (tray 2 trailing edge) earli |
110 | Description: 110.20 Printhead error was detected before the motor was turned on. 110.21 No printhead power when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (lost first Hysnc) was detected. 110.33 |