Error |
---|
These results are ranked by popularity.
Error | |
---|---|
SC625 | Description: Communication error between scanner and projector Type: 4 - Description - When the scanner IPU board detects a communication error in the projector during communication with the projector based on the projector optical-fiber connection proto |
SC440 | Description: Main motor abnormal Type: 2 - Description - The main control board notifies the SCU when the main motor does not start up within a predetermined period of time or does not output the LOCK signal for more than a predetermined period of time d |
SC901 | Description: Inconsistent main counter and backup counter Type: 2 - Description - This SC is displayed when the difference between the main and backup counter values is more than ±5. - Detection Timing - When the power switch is turned on When the Counte |
SC542 | Description: Fusing (hot roller) warm-up error Type: 1 - Description - The main control board notifies the SCU when the fusing (hot roller) thermistor does not output an analog value corresponding to the ready temperature within 12 minutes after the powe |
SC196 | Description: Extended IPU abnormal Type: 4 - Description - The extended IPU board diagnostics notify the scanner IPU board when its image processing ASIC on the extended IPU board is faulty at power-on. Then the scanner IPU board notifies the SCU of this |
The most common error codes.
Error | |
---|---|
SC625 | Description: Communication error between scanner and projector Type: 4 - Description - When the scanner IPU board detects a communication error in the projector during communication with the projector based on the projector optical-fiber connection proto |
SC440 | Description: Main motor abnormal Type: 2 - Description - The main control board notifies the SCU when the main motor does not start up within a predetermined period of time or does not output the LOCK signal for more than a predetermined period of time d |
SC901 | Description: Inconsistent main counter and backup counter Type: 2 - Description - This SC is displayed when the difference between the main and backup counter values is more than ±5. - Detection Timing - When the power switch is turned on When the Counte |
SC542 | Description: Fusing (hot roller) warm-up error Type: 1 - Description - The main control board notifies the SCU when the fusing (hot roller) thermistor does not output an analog value corresponding to the ready temperature within 12 minutes after the powe |
SC196 | Description: Extended IPU abnormal Type: 4 - Description - The extended IPU board diagnostics notify the scanner IPU board when its image processing ASIC on the extended IPU board is faulty at power-on. Then the scanner IPU board notifies the SCU of this |
SC625 | Description: Communication error between scanner and projector Type: 4 - Description - When the scanner IPU board detects a communication error in the projector during communication with the projector based on the projector optical-fiber connection proto |
SC440 | Description: Main motor abnormal Type: 2 - Description - The main control board notifies the SCU when the main motor does not start up within a predetermined period of time or does not output the LOCK signal for more than a predetermined period of time d |
SC901 | Description: Inconsistent main counter and backup counter Type: 2 - Description - This SC is displayed when the difference between the main and backup counter values is more than ±5. - Detection Timing - When the power switch is turned on When the Counte |
SC542 | Description: Fusing (hot roller) warm-up error Type: 1 - Description - The main control board notifies the SCU when the fusing (hot roller) thermistor does not output an analog value corresponding to the ready temperature within 12 minutes after the powe |
SC196 | Description: Extended IPU abnormal Type: 4 - Description - The extended IPU board diagnostics notify the scanner IPU board when its image processing ASIC on the extended IPU board is faulty at power-on. Then the scanner IPU board notifies the SCU of this |