These results are ranked by popularity.
Error | |
---|---|
E-23 | Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates. |
E-00 | Description: Clamper Motor Failure The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on. |
E-24 | Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates. |
E-01 | Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on. |
E-40 | Description: Thermal Head ID error The CPU detects an abnormal ID signal from the thermal head. |
The most common error codes.
Error | |
---|---|
E-23 | Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates. |
E-00 | Description: Clamper Motor Failure The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on. |
E-24 | Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates. |
E-01 | Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on. |
E-40 | Description: Thermal Head ID error The CPU detects an abnormal ID signal from the thermal head. |
E-23 | Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates. |
E-00 | Description: Clamper Motor Failure The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on. |
E-24 | Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates. |
E-01 | Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on. |
E-40 | Description: Thermal Head ID error The CPU detects an abnormal ID signal from the thermal head. |