These results are ranked by popularity.
Error | |
---|---|
858 | Description: Data Encryption Error 1 These are errors of the HDD Data Encryption Option D377. |
725-32 | Description: 3rd Stopper Motor Error Multi Folder (D615) The 3rd stopper HP sensor did not detect the 3rd stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
636-02 | Description: SD Card Error: Version error The version of the expanded authentication module is not correct. |
300 | Description: Charge corona output error The feedback voltage from the charge corona unit is detected too high 9 times. |
955 | Description: Memory setting error The settings that are required for image processing using the memory are not sent from the IPU. |
The most common error codes.
Error | |
---|---|
858 | Description: Data Encryption Error 1 These are errors of the HDD Data Encryption Option D377. |
725-32 | Description: 3rd Stopper Motor Error Multi Folder (D615) The 3rd stopper HP sensor did not detect the 3rd stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
636-02 | Description: SD Card Error: Version error The version of the expanded authentication module is not correct. |
300 | Description: Charge corona output error The feedback voltage from the charge corona unit is detected too high 9 times. |
955 | Description: Memory setting error The settings that are required for image processing using the memory are not sent from the IPU. |
955 | Description: Memory setting error The settings that are required for image processing using the memory are not sent from the IPU. |
540-01 | Description: Fusing exit motor error The PLL lock signal was low for 2 s during motor operation. |
858 | Description: Data Encryption Error 1 These are errors of the HDD Data Encryption Option D377. |
720-73 | Description: Rear shift jogger motor (D611/D612) The side fences do not retract within the prescribed time after the shift jogger motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
636-02 | Description: SD Card Error: Version error The version of the expanded authentication module is not correct. |