These results are ranked by popularity.
Error | |
---|---|
541 | Description: Thermistor Error The thermistor output is less than 0°C for 7 seconds. |
823 | Description: USB/ Network Device Error An interface error in the USB connection or NIB connection occurs. |
195 | Description: Serial Number Error The serial number stored in the memory (EGB) is not correct. |
542 | Description: Print Ready Temperature Error The heating roller temperature increase during a set time is not correct. The fusing temperature does not reach the print ready temperature within a set time after the fusing lamp has turned on. |
824 | Description: EEPROM Error An EEPROM check error at power-on occurs. |
The most common error codes.
Error | |
---|---|
541 | Description: Thermistor Error The thermistor output is less than 0°C for 7 seconds. |
823 | Description: USB/ Network Device Error An interface error in the USB connection or NIB connection occurs. |
195 | Description: Serial Number Error The serial number stored in the memory (EGB) is not correct. |
542 | Description: Print Ready Temperature Error The heating roller temperature increase during a set time is not correct. The fusing temperature does not reach the print ready temperature within a set time after the fusing lamp has turned on. |
824 | Description: EEPROM Error An EEPROM check error at power-on occurs. |
541 | Description: Thermistor Error The thermistor output is less than 0°C for 7 seconds. |
823 | Description: USB/ Network Device Error An interface error in the USB connection or NIB connection occurs. |
195 | Description: Serial Number Error The serial number stored in the memory (EGB) is not correct. |
542 | Description: Print Ready Temperature Error The heating roller temperature increase during a set time is not correct. The fusing temperature does not reach the print ready temperature within a set time after the fusing lamp has turned on. |
824 | Description: EEPROM Error An EEPROM check error at power-on occurs. |