Duplo DPL520 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Duplo DPL520 Top Searches

These results are ranked by popularity.

Error
E001Description: • The main motor (M1) is defective. • The main PCB unit is defective. • The encoder sensor (PS7) is defective
E002Description: • The elevator motor (M2) is defective. • The elevator up limit sensor (PS9) is defective. • The elevator down limit switch (MS6) is defective. • The main PCB unit is defective. • The elevator operation is defective.
E012Description: • The clamp motor is defective. • The clamp A/C mode sensor is defective. • The clamp B mode sensor is defective. • The main PCB unit is defective. • The 24 V power supply is defective. • Disconnection/Poor connector connection
E014Description: • The main PCB unit is defective. • Disconnection/Poor connector connection

Duplo DPL520 Common Errors

The most common error codes.

Error
E001Description: • The main motor (M1) is defective. • The main PCB unit is defective. • The encoder sensor (PS7) is defective
E002Description: • The elevator motor (M2) is defective. • The elevator up limit sensor (PS9) is defective. • The elevator down limit switch (MS6) is defective. • The main PCB unit is defective. • The elevator operation is defective.
E012Description: • The clamp motor is defective. • The clamp A/C mode sensor is defective. • The clamp B mode sensor is defective. • The main PCB unit is defective. • The 24 V power supply is defective. • Disconnection/Poor connector connection
E014Description: • The main PCB unit is defective. • Disconnection/Poor connector connection
E001Description: • The main motor (M1) is defective. • The main PCB unit is defective. • The encoder sensor (PS7) is defective
E002Description: • The elevator motor (M2) is defective. • The elevator up limit sensor (PS9) is defective. • The elevator down limit switch (MS6) is defective. • The main PCB unit is defective. • The elevator operation is defective.
E012Description: • The clamp motor is defective. • The clamp A/C mode sensor is defective. • The clamp B mode sensor is defective. • The main PCB unit is defective. • The 24 V power supply is defective. • Disconnection/Poor connector connection
E014Description: • The main PCB unit is defective. • Disconnection/Poor connector connection