'

Epson Stylus Pro GS6000 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson Stylus Pro GS6000 Top Searches

These results are ranked by popularity.

Error
1927Description: HEATER CONT BOARD ASSYSUB TANK SENSOR 8 failure The High sensor for the sub tank 8 is ON (ink exists), but the Low senor is OFF.
200BDescription: Internal insufficient memory error The main firmware has a defect.
131BDescription: Head driver (transmission gate) overheat error The temperature of the head driver rises, and reaches the specified level.
1910Description: Insufficient temperature of the PRE HEATERS(64) on the HEATER RELAY BOARD ASSY The required temperature of the PRE HEATERS(64) cannot be reached.
1A23Description: RTC analysis error The value information on various absolute time stored on NVRAM is abnormal.

Epson Stylus Pro GS6000 Common Errors

The most common error codes.

Error
1927Description: HEATER CONT BOARD ASSYSUB TANK SENSOR 8 failure The High sensor for the sub tank 8 is ON (ink exists), but the Low senor is OFF.
200BDescription: Internal insufficient memory error The main firmware has a defect.
131BDescription: Head driver (transmission gate) overheat error The temperature of the head driver rises, and reaches the specified level.
1910Description: Insufficient temperature of the PRE HEATERS(64) on the HEATER RELAY BOARD ASSY The required temperature of the PRE HEATERS(64) cannot be reached.
1A23Description: RTC analysis error The value information on various absolute time stored on NVRAM is abnormal.
1927Description: HEATER CONT BOARD ASSYSUB TANK SENSOR 8 failure The High sensor for the sub tank 8 is ON (ink exists), but the Low senor is OFF.
200BDescription: Internal insufficient memory error The main firmware has a defect.
131BDescription: Head driver (transmission gate) overheat error The temperature of the head driver rises, and reaches the specified level.
1910Description: Insufficient temperature of the PRE HEATERS(64) on the HEATER RELAY BOARD ASSY The required temperature of the PRE HEATERS(64) cannot be reached.
1A23Description: RTC analysis error The value information on various absolute time stored on NVRAM is abnormal.