| Error |
|---|
These results are ranked by popularity.
| Error | |
|---|---|
| Cxxxx | Description: Controller error |
| Dxxxx | Description: Controller error |
| E100 | Description: Exposure failure SOS signal cannot be detected at correct intervals. Output of laser beam does not reach the specified value. |
| E300 | Description: Fusing failure Temperature of Heat Roller does not reach the specified value. Warming-up of Fuser Unit is not completed within the specified period. Thermistor detects an abnormally high temperature. |
| E500 | Description: MAIN MOTOR failure MOTOR ASSY is not turning, or not turning normally. |
The most common error codes.
| Error | |
|---|---|
| Cxxxx | Description: Controller error |
| Dxxxx | Description: Controller error |
| E100 | Description: Exposure failure SOS signal cannot be detected at correct intervals. Output of laser beam does not reach the specified value. |
| E300 | Description: Fusing failure Temperature of Heat Roller does not reach the specified value. Warming-up of Fuser Unit is not completed within the specified period. Thermistor detects an abnormally high temperature. |
| E500 | Description: MAIN MOTOR failure MOTOR ASSY is not turning, or not turning normally. |
| Cxxxx | Description: Controller error |
| Dxxxx | Description: Controller error |
| E100 | Description: Exposure failure SOS signal cannot be detected at correct intervals. Output of laser beam does not reach the specified value. |
| E300 | Description: Fusing failure Temperature of Heat Roller does not reach the specified value. Warming-up of Fuser Unit is not completed within the specified period. Thermistor detects an abnormally high temperature. |
| E500 | Description: MAIN MOTOR failure MOTOR ASSY is not turning, or not turning normally. |