Konica-Minolta bizhub Pro 1050e Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta bizhub Pro 1050e Top Searches

These results are ranked by popularity.

Error
SC29-05Description: The gamma sensor output abnormality. While in the gamma correction, a patch for control is not output. (No output is made from the gamma sensor.)
SC46-61Description: The scan operation starts before the original skew adjustment is terminated. (The skew adjustment is too late.)
SC77-41Description: The entrance conveyance motor (M1) detects an error detection signal for a specified period of time in succession.
SC23-01Description: The speed error signal of the toner bottle motor (M6) is checked. An error detection signal is detected twice in succession a specified period of time after the M6 turns ON (the first signal is ignored).
SC42-09Description: The blowout of a fuse for the suction fans /2 (FM7) and /3 (FM8) in the AC drive board (ACDB) is checked. An abnormal condition occurs with the FM7/FM8 EM signal a specified period of time after the FM7/FM8 turns ON. This abnormal condition

Konica-Minolta bizhub Pro 1050e Common Errors

The most common error codes.

Error
SC29-05Description: The gamma sensor output abnormality. While in the gamma correction, a patch for control is not output. (No output is made from the gamma sensor.)
SC46-61Description: The scan operation starts before the original skew adjustment is terminated. (The skew adjustment is too late.)
SC77-41Description: The entrance conveyance motor (M1) detects an error detection signal for a specified period of time in succession.
SC23-01Description: The speed error signal of the toner bottle motor (M6) is checked. An error detection signal is detected twice in succession a specified period of time after the M6 turns ON (the first signal is ignored).
SC42-09Description: The blowout of a fuse for the suction fans /2 (FM7) and /3 (FM8) in the AC drive board (ACDB) is checked. An abnormal condition occurs with the FM7/FM8 EM signal a specified period of time after the FM7/FM8 turns ON. This abnormal condition
SC29-05Description: The gamma sensor output abnormality. While in the gamma correction, a patch for control is not output. (No output is made from the gamma sensor.)
SC46-61Description: The scan operation starts before the original skew adjustment is terminated. (The skew adjustment is too late.)
SC77-41Description: The entrance conveyance motor (M1) detects an error detection signal for a specified period of time in succession.
SC23-01Description: The speed error signal of the toner bottle motor (M6) is checked. An error detection signal is detected twice in succession a specified period of time after the M6 turns ON (the first signal is ignored).
SC42-09Description: The blowout of a fuse for the suction fans /2 (FM7) and /3 (FM8) in the AC drive board (ACDB) is checked. An abnormal condition occurs with the FM7/FM8 EM signal a specified period of time after the FM7/FM8 turns ON. This abnormal condition