Konica-Minolta bizhub Pro 1051 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta bizhub Pro 1051 Top Searches

These results are ranked by popularity.

Error
C-2802Description: The maximum density correction (Dmax) is not completed. While in Dmax, the number of rotations of the developing sleeve gets to the maximum.
C-8402Description: Original conveyance sensor (PS308) abnormality. 18-4
C-0370Description: 2nd tandem PF-702/703 paper feed assist fan /Fr1 (FM1) power abnormality. The FM1EM error detection signal is detected twice in succession within a specified period of time after FM1 was turned ON. At this time, an error detection signal (bl
C-0622Description: PI-PFU (PF-703) dehumidifier fan /Lt1 (FM23) rotation abnormality. The FM23EM error detection signal is detected twice in succession within a specified period of time after FM23 was turned ON. However, an error detection signal (blowout of I
C-1275Description: Trimmer edge drive wire abnormality. The wire slack sensor (PS62) detected the slack of the trimmer edge drive wire. 34-3

Konica-Minolta bizhub Pro 1051 Common Errors

The most common error codes.

Error
C-2802Description: The maximum density correction (Dmax) is not completed. While in Dmax, the number of rotations of the developing sleeve gets to the maximum.
C-8402Description: Original conveyance sensor (PS308) abnormality. 18-4
C-0370Description: 2nd tandem PF-702/703 paper feed assist fan /Fr1 (FM1) power abnormality. The FM1EM error detection signal is detected twice in succession within a specified period of time after FM1 was turned ON. At this time, an error detection signal (bl
C-0622Description: PI-PFU (PF-703) dehumidifier fan /Lt1 (FM23) rotation abnormality. The FM23EM error detection signal is detected twice in succession within a specified period of time after FM23 was turned ON. However, an error detection signal (blowout of I
C-1275Description: Trimmer edge drive wire abnormality. The wire slack sensor (PS62) detected the slack of the trimmer edge drive wire. 34-3
C-2802Description: The maximum density correction (Dmax) is not completed. While in Dmax, the number of rotations of the developing sleeve gets to the maximum.
C-8402Description: Original conveyance sensor (PS308) abnormality. 18-4
C-0370Description: 2nd tandem PF-702/703 paper feed assist fan /Fr1 (FM1) power abnormality. The FM1EM error detection signal is detected twice in succession within a specified period of time after FM1 was turned ON. At this time, an error detection signal (bl
C-0622Description: PI-PFU (PF-703) dehumidifier fan /Lt1 (FM23) rotation abnormality. The FM23EM error detection signal is detected twice in succession within a specified period of time after FM23 was turned ON. However, an error detection signal (blowout of I
C-1275Description: Trimmer edge drive wire abnormality. The wire slack sensor (PS62) detected the slack of the trimmer edge drive wire. 34-3