Konica-Minolta bizhub PRESS 1250 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta bizhub PRESS 1250 Top Searches

These results are ranked by popularity.

Error
C-3202Description: Web motor (M24) power abnormality. An error detection signal (blowout of ICP) is detected when M24 turns ON. At this time, an error detection signal (24V cut off) is not detected.
C-6710Description: Density conversion gamma curve creation abnormality. A density conversion gamma curve cannot be created normally.
C-1534Description: The booklet rear edge pressing process has not been completed within a specified period of time after the booklet stopper motor (M65) turns ON.
C-1451Description: When the FD is unready, a signal to start operations is received from the main body.
C-0615Description: 2nd tandem PF-703 dehumidifier fan /Rt3 (FM26) rotation abnormality. The FM26EM error detection signal is detected twice in succession within a specified period of time after FM26 was turned ON. However, an error detection signal (blowout of

Konica-Minolta bizhub PRESS 1250 Common Errors

The most common error codes.

Error
C-3202Description: Web motor (M24) power abnormality. An error detection signal (blowout of ICP) is detected when M24 turns ON. At this time, an error detection signal (24V cut off) is not detected.
C-6710Description: Density conversion gamma curve creation abnormality. A density conversion gamma curve cannot be created normally.
C-1534Description: The booklet rear edge pressing process has not been completed within a specified period of time after the booklet stopper motor (M65) turns ON.
C-1451Description: When the FD is unready, a signal to start operations is received from the main body.
C-0615Description: 2nd tandem PF-703 dehumidifier fan /Rt3 (FM26) rotation abnormality. The FM26EM error detection signal is detected twice in succession within a specified period of time after FM26 was turned ON. However, an error detection signal (blowout of
C-6710Description: Density conversion gamma curve creation abnormality. A density conversion gamma curve cannot be created normally.
C-2304Description: Developing suction fan (FM22) rotation abnormality + 24V power abnormality. The FM5 EM error detection signal is detected twice in succession within a specified period of time after FM22 was turned ON. At this time, an error detection signal
C-2102Description: Charger cleaning motor (M23) power abnormality.
C-1136Description: After the punch switchover motor (M608) turns ON, punch switchover switch (MS601) does not turn ON from OFF, or not turn OFF from ON within a specified period of time.
C-0675Description: PI-PFU (PF-703) dehumidification heater /2 (HTR2) high temperature software abnormality. After turned ON, the temperature sensor /6 (TEMS/6) detects the heater temperature exceeding 105°C.