Konica-Minolta Bizhub 654 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 654 Top Searches

These results are ranked by popularity.

Error
CD004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and printer control board (PRCB).
C8106Description: Lift up mechanism failure (Downward movement) The lift up lower sensor (PS3) is not blocked after a lapse of a given time after the lift-up motor (M5) goes down (is turned backward).
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2414Description: Developing unit new release failure The status with the new unit is not cleared after the new developing unit is set.
CF001 ... CFFE7Description: Abort code

Konica-Minolta Bizhub 654 Common Errors

The most common error codes.

Error
CD004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and printer control board (PRCB).
C8106Description: Lift up mechanism failure (Downward movement) The lift up lower sensor (PS3) is not blocked after a lapse of a given time after the lift-up motor (M5) goes down (is turned backward).
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2414Description: Developing unit new release failure The status with the new unit is not cleared after the new developing unit is set.
CF001 ... CFFE7Description: Abort code
CD004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and printer control board (PRCB).
C8106Description: Lift up mechanism failure (Downward movement) The lift up lower sensor (PS3) is not blocked after a lapse of a given time after the lift-up motor (M5) goes down (is turned backward).
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2414Description: Developing unit new release failure The status with the new unit is not cleared after the new developing unit is set.
CF001 ... CFFE7Description: Abort code