Konica-Minolta Bizhub 7728 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 7728 Top Searches

These results are ranked by popularity.

Error
C2431Description: IU Fuse Blowing Failure - The fuse is not blown even after the lapse of a predetermined period of time.
C5102Description: Main Motor Failure - The Transport Motor Lock signal remains set to H for a set period of time while the Transport Motor is turning.
C0215Description: LCT Shift Motor Malfunction - See PC-407 sevice manual
C11A5Description: Saddle In & Out Guide Motor Failure - - See SD-507 service manual.
C0001Description: LCT Communication Failure - Due to a software malfunction, etc., the time on the watchdog timer has run out and a reset is performed.

Konica-Minolta Bizhub 7728 Common Errors

The most common error codes.

Error
C2431Description: IU Fuse Blowing Failure - The fuse is not blown even after the lapse of a predetermined period of time.
C5102Description: Main Motor Failure - The Transport Motor Lock signal remains set to H for a set period of time while the Transport Motor is turning.
C0215Description: LCT Shift Motor Malfunction - See PC-407 sevice manual
C11A5Description: Saddle In & Out Guide Motor Failure - - See SD-507 service manual.
C0001Description: LCT Communication Failure - Due to a software malfunction, etc., the time on the watchdog timer has run out and a reset is performed.
C2431Description: IU Fuse Blowing Failure - The fuse is not blown even after the lapse of a predetermined period of time.
C5102Description: Main Motor Failure - The Transport Motor Lock signal remains set to H for a set period of time while the Transport Motor is turning.
C0215Description: LCT Shift Motor Malfunction - See PC-407 sevice manual
C11A5Description: Saddle In & Out Guide Motor Failure - - See SD-507 service manual.
C0001Description: LCT Communication Failure - Due to a software malfunction, etc., the time on the watchdog timer has run out and a reset is performed.