Konica-Minolta Bizhub C252 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C252 Top Searches

These results are ranked by popularity.

Error
C3461Description: New Fusing Unit New Article Release • A new installation is not detected when a new Fusing Unit is installed.
C1401Description: Finishing option Backup RAM failure
C9401Description: Exposure Lamp’s failure to turn ON • The output from the CCD Sensor is a predetermined value or less during CCD Sensor gain adjustment.
C0214Description: LCT shifting failure
C4551Description: Laser malfunction (Cyan) • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.

Konica-Minolta Bizhub C252 Common Errors

The most common error codes.

Error
C3461Description: New Fusing Unit New Article Release • A new installation is not detected when a new Fusing Unit is installed.
C1401Description: Finishing option Backup RAM failure
C9401Description: Exposure Lamp’s failure to turn ON • The output from the CCD Sensor is a predetermined value or less during CCD Sensor gain adjustment.
C0214Description: LCT shifting failure
C4551Description: Laser malfunction (Cyan) • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C3461Description: New Fusing Unit New Article Release • A new installation is not detected when a new Fusing Unit is installed.
C1401Description: Finishing option Backup RAM failure
C9401Description: Exposure Lamp’s failure to turn ON • The output from the CCD Sensor is a predetermined value or less during CCD Sensor gain adjustment.
C0214Description: LCT shifting failure
C4551Description: Laser malfunction (Cyan) • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.