Konica-Minolta Bizhub C552DS Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C552DS Top Searches

These results are ranked by popularity.

Error
C3922Description: Fusing sensor wire breaks detection (Edge of the heating roller) • At the warm-up stage, the heating roller temperature sensor/3 voltage does not decrease by predetermined steps (temperature rise) within a predetermined period of time.
C255Description: Black TCR sensor adjustment failure
C2151Description: Secondary transfer roller pressure welding alienation • The pressure welding alienation sensor doesn’t turn OFF (retracting) even after the lapse of a given period of time after the 2nd image transfer pressure retraction motor has started ro
CC158Description: Finisher ROM error (ZU)
C1133Description: Punch shift motor drive malfunction •The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after the punch shift mot

Konica-Minolta Bizhub C552DS Common Errors

The most common error codes.

Error
C3922Description: Fusing sensor wire breaks detection (Edge of the heating roller) • At the warm-up stage, the heating roller temperature sensor/3 voltage does not decrease by predetermined steps (temperature rise) within a predetermined period of time.
C255Description: Black TCR sensor adjustment failure
C2151Description: Secondary transfer roller pressure welding alienation • The pressure welding alienation sensor doesn’t turn OFF (retracting) even after the lapse of a given period of time after the 2nd image transfer pressure retraction motor has started ro
CC158Description: Finisher ROM error (ZU)
C1133Description: Punch shift motor drive malfunction •The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after the punch shift mot
C3922Description: Fusing sensor wire breaks detection (Edge of the heating roller) • At the warm-up stage, the heating roller temperature sensor/3 voltage does not decrease by predetermined steps (temperature rise) within a predetermined period of time.
C255Description: Black TCR sensor adjustment failure
C2151Description: Secondary transfer roller pressure welding alienation • The pressure welding alienation sensor doesn’t turn OFF (retracting) even after the lapse of a given period of time after the 2nd image transfer pressure retraction motor has started ro
CC158Description: Finisher ROM error (ZU)
C1133Description: Punch shift motor drive malfunction •The punch shift home sensor (PS605) is not turned ON, or is not turned OFF after it is turned ON, even after the set period of time has elapsed after the punch shift mot