Konica-Minolta Bizhub C554 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C554 Top Searches

These results are ranked by popularity.

Error
CC170...CC186Description: Dynamic link error during starting (AP0) Dynamic link error during starting (AP1) Dynamic link error during starting (AP2) Dynamic link error during starting (AP3) Dynamic link error during starting (AP4) Dynamic link error during starting (
C1124Description: Sheet feeder up/down drive failure (lower) The tray upper limit sensor /Lw (PS209) or tray lower limit sensor /Lw (PS210) are not turned ON even after the set period of time has elapsed after the tray lift m
C6911Description: DSC board mount failure 2 When MFP detects that DSC board/2 (back side) is not properly installed.
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2563Description: Yellow TCR sensor failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.

Konica-Minolta Bizhub C554 Common Errors

The most common error codes.

Error
CC170...CC186Description: Dynamic link error during starting (AP0) Dynamic link error during starting (AP1) Dynamic link error during starting (AP2) Dynamic link error during starting (AP3) Dynamic link error during starting (AP4) Dynamic link error during starting (
C1124Description: Sheet feeder up/down drive failure (lower) The tray upper limit sensor /Lw (PS209) or tray lower limit sensor /Lw (PS210) are not turned ON even after the set period of time has elapsed after the tray lift m
C6911Description: DSC board mount failure 2 When MFP detects that DSC board/2 (back side) is not properly installed.
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2563Description: Yellow TCR sensor failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
CC170...CC186Description: Dynamic link error during starting (AP0) Dynamic link error during starting (AP1) Dynamic link error during starting (AP2) Dynamic link error during starting (AP3) Dynamic link error during starting (AP4) Dynamic link error during starting (
C1124Description: Sheet feeder up/down drive failure (lower) The tray upper limit sensor /Lw (PS209) or tray lower limit sensor /Lw (PS210) are not turned ON even after the set period of time has elapsed after the tray lift m
C6911Description: DSC board mount failure 2 When MFP detects that DSC board/2 (back side) is not properly installed.
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2563Description: Yellow TCR sensor failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.