Kyocera TASKalfa 620 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 620 Top Searches

These results are ranked by popularity.

Error
C6000Description: Fuser heater lamp break • The fuser temperature does not increase for 40 s after the fuser heaters have been turned on for warming up. • The fuser temperature remains below 50C/122F for 10 s continuously after the fuser heaters have been t
C1020Description: Lift motor 2 error • When cassette 2 is inserted, lift limit switch 2 does not turn on within 33 s of lift motor 2 turning on. This error is detected four times successively. • During copying, lift limit switch 2 does not turn on within 1
C9080Description: Communication problem between DP and CIS A communication error is detected.
C2640Description: Side feeder drive motor error
C0220Description: CPU communication problem • Synchronization cannot be taken between the main CPU and scanner CPU.

Kyocera TASKalfa 620 Common Errors

The most common error codes.

Error
C6000Description: Fuser heater lamp break • The fuser temperature does not increase for 40 s after the fuser heaters have been turned on for warming up. • The fuser temperature remains below 50C/122F for 10 s continuously after the fuser heaters have been t
C1020Description: Lift motor 2 error • When cassette 2 is inserted, lift limit switch 2 does not turn on within 33 s of lift motor 2 turning on. This error is detected four times successively. • During copying, lift limit switch 2 does not turn on within 1
C9080Description: Communication problem between DP and CIS A communication error is detected.
C2640Description: Side feeder drive motor error
C0220Description: CPU communication problem • Synchronization cannot be taken between the main CPU and scanner CPU.
C6000Description: Fuser heater lamp break • The fuser temperature does not increase for 40 s after the fuser heaters have been turned on for warming up. • The fuser temperature remains below 50C/122F for 10 s continuously after the fuser heaters have been t
C1020Description: Lift motor 2 error • When cassette 2 is inserted, lift limit switch 2 does not turn on within 33 s of lift motor 2 turning on. This error is detected four times successively. • During copying, lift limit switch 2 does not turn on within 1
C9080Description: Communication problem between DP and CIS A communication error is detected.
C2640Description: Side feeder drive motor error
C0220Description: CPU communication problem • Synchronization cannot be taken between the main CPU and scanner CPU.