Error |
---|
These results are ranked by popularity.
Error | |
---|---|
8190 | Description: DF side registration motor 2 error 1 When initial operation, DF side registration sensor 2 does not turn on within 3 s. |
1250 | Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession. |
F4DX, F4EX | Description: An error is detected at the Entity control section |
7301 | Description: Toner hopper motor K error During the Toner hopper motor K is driven, an event in which a locking was detected for 15 times in 200 ms intervals. |
2640 | Description: SD paper feed motor error (side deck) After SD paper feed motor is driven, the ready signal does not turn to L within 2 s. |
The most common error codes.
Error | |
---|---|
8190 | Description: DF side registration motor 2 error 1 When initial operation, DF side registration sensor 2 does not turn on within 3 s. |
1250 | Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession. |
F4DX, F4EX | Description: An error is detected at the Entity control section |
7301 | Description: Toner hopper motor K error During the Toner hopper motor K is driven, an event in which a locking was detected for 15 times in 200 ms intervals. |
2640 | Description: SD paper feed motor error (side deck) After SD paper feed motor is driven, the ready signal does not turn to L within 2 s. |
6750 | Description: Fuser IH output over-current error The output current of IH CPU is higher than 110 A for 10 ms in succession. |
1250 | Description: SM multi feed sensor communication error (side multi tray) A communication error is detected 3 times in succession. |
9170 | Description: Coin vender pay-out sensor error Coin is paid out despite the pay-out motor is determined not active. |
8190 | Description: DF side registration motor 2 error 1 When initial operation, DF side registration sensor 2 does not turn on within 3 s. |
2640 | Description: SD paper feed motor error (side deck) After SD paper feed motor is driven, the ready signal does not turn to L within 2 s. |