Kyocera FS8100DN Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FS8100DN Top Searches

These results are ranked by popularity.

Error
5304Description: Cleaning lamp Y break error After the cleaning lamp Y ON signal is turned on, the cleaning lamp Y break signal is detected continuously 5 times for 10 ms.
8340Description: Centerfold staple motor problem (optional centerfold unit of 3000-sheet document finisher) Jam89 is indicated.
7901Description: Drum BK EEPROM error Reading from or writing to EEPROM cannot be performed.
9530 ... 9550Description: Contact the Service Administrative Division.
8060Description: Paper conveying belt motor 2 problem (optional 3000-sheet document finisher) Paper conveying belt home position sensor 2 does not turn off within 1.5 s. Paper conveying belt home position sensor 2 does not turn on within 1.5 s.

Kyocera FS8100DN Common Errors

The most common error codes.

Error
5304Description: Cleaning lamp Y break error After the cleaning lamp Y ON signal is turned on, the cleaning lamp Y break signal is detected continuously 5 times for 10 ms.
8340Description: Centerfold staple motor problem (optional centerfold unit of 3000-sheet document finisher) Jam89 is indicated.
7901Description: Drum BK EEPROM error Reading from or writing to EEPROM cannot be performed.
9530 ... 9550Description: Contact the Service Administrative Division.
8060Description: Paper conveying belt motor 2 problem (optional 3000-sheet document finisher) Paper conveying belt home position sensor 2 does not turn off within 1.5 s. Paper conveying belt home position sensor 2 does not turn on within 1.5 s.
5304Description: Cleaning lamp Y break error After the cleaning lamp Y ON signal is turned on, the cleaning lamp Y break signal is detected continuously 5 times for 10 ms.
8340Description: Centerfold staple motor problem (optional centerfold unit of 3000-sheet document finisher) Jam89 is indicated.
7901Description: Drum BK EEPROM error Reading from or writing to EEPROM cannot be performed.
9530 ... 9550Description: Contact the Service Administrative Division.
8060Description: Paper conveying belt motor 2 problem (optional 3000-sheet document finisher) Paper conveying belt home position sensor 2 does not turn off within 1.5 s. Paper conveying belt home position sensor 2 does not turn on within 1.5 s.