Kyocera FSC8026N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC8026N Top Searches

These results are ranked by popularity.

Error
7200Description: Broken internal thermistor wire • The value of input from the internal thermistor 4.5 V or more is detected.
2201Description: Drum motor K error • After the motor drive ON signal is output and 3 s elapses, the rated speed reach signal is not input continuously for 2 s.
F040Description: Main - Engine controller PWBs communication error • The communication breakdown occurred between the main controller PWB and the engine controller PWB during the predetermined period in seconds.
5303Description: Eraser lamp M break error • After the eraser lamp C ON signal is turned on, the eraser lamp M break signal is detected continuously for 200 ms.
0440Description: Document finisher communication problem (optional document finisher) • Reception is not normally completed even after 40 times of retry at startup or 5 times of retry in normal operation.

Kyocera FSC8026N Common Errors

The most common error codes.

Error
7200Description: Broken internal thermistor wire • The value of input from the internal thermistor 4.5 V or more is detected.
2201Description: Drum motor K error • After the motor drive ON signal is output and 3 s elapses, the rated speed reach signal is not input continuously for 2 s.
F040Description: Main - Engine controller PWBs communication error • The communication breakdown occurred between the main controller PWB and the engine controller PWB during the predetermined period in seconds.
5303Description: Eraser lamp M break error • After the eraser lamp C ON signal is turned on, the eraser lamp M break signal is detected continuously for 200 ms.
0440Description: Document finisher communication problem (optional document finisher) • Reception is not normally completed even after 40 times of retry at startup or 5 times of retry in normal operation.
7200Description: Broken internal thermistor wire • The value of input from the internal thermistor 4.5 V or more is detected.
2201Description: Drum motor K error • After the motor drive ON signal is output and 3 s elapses, the rated speed reach signal is not input continuously for 2 s.
F040Description: Main - Engine controller PWBs communication error • The communication breakdown occurred between the main controller PWB and the engine controller PWB during the predetermined period in seconds.
5303Description: Eraser lamp M break error • After the eraser lamp C ON signal is turned on, the eraser lamp M break signal is detected continuously for 200 ms.
0440Description: Document finisher communication problem (optional document finisher) • Reception is not normally completed even after 40 times of retry at startup or 5 times of retry in normal operation.