Kyocera KMC4035E Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KMC4035E Top Searches

These results are ranked by popularity.

Error
C5302Description: Cleaning lamp C break error After the cleaning lamp C ON signal is turned on, the cleaning lamp C break signal is detected continuously 5 times for 10 ms.
C1100Description: Paper feeder lift motor 1 error (optional 3000-sheet paper feeder) A motor over-current signal is detected continuously for 1 s or longer.
C8320Description: Centerfold paper conveying belt motor problem (optional centerfold unit of 3000-sheet document finisher) The home position is not detected when initial operation even if 2.5 s passed.
C7800Description: Broken external thermistor wire An abnormal value is detected in the input data to the outer temperature sensor.
C2204Description: Drum motor Y error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.

Kyocera KMC4035E Common Errors

The most common error codes.

Error
C5302Description: Cleaning lamp C break error After the cleaning lamp C ON signal is turned on, the cleaning lamp C break signal is detected continuously 5 times for 10 ms.
C1100Description: Paper feeder lift motor 1 error (optional 3000-sheet paper feeder) A motor over-current signal is detected continuously for 1 s or longer.
C8320Description: Centerfold paper conveying belt motor problem (optional centerfold unit of 3000-sheet document finisher) The home position is not detected when initial operation even if 2.5 s passed.
C7800Description: Broken external thermistor wire An abnormal value is detected in the input data to the outer temperature sensor.
C2204Description: Drum motor Y error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
C5302Description: Cleaning lamp C break error After the cleaning lamp C ON signal is turned on, the cleaning lamp C break signal is detected continuously 5 times for 10 ms.
C1100Description: Paper feeder lift motor 1 error (optional 3000-sheet paper feeder) A motor over-current signal is detected continuously for 1 s or longer.
C8320Description: Centerfold paper conveying belt motor problem (optional centerfold unit of 3000-sheet document finisher) The home position is not detected when initial operation even if 2.5 s passed.
C7800Description: Broken external thermistor wire An abnormal value is detected in the input data to the outer temperature sensor.
C2204Description: Drum motor Y error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.