These results are ranked by popularity.
Error | |
---|---|
16 | Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory. |
H4-00 | Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C. |
10 | Description: IMC trouble An abnormality occurs in the IMC. |
16 | Description: Abnormal laser output When the laser output is stopped, HSYNC is detected. |
L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg |
The most common error codes.
Error | |
---|---|
16 | Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory. |
H4-00 | Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C. |
10 | Description: IMC trouble An abnormality occurs in the IMC. |
16 | Description: Abnormal laser output When the laser output is stopped, HSYNC is detected. |
L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg |
16 | Description: IMC DIMM memory read/write check error An installation error occurs in the IMC memory module. An error occurs during access to the IMC memory. |
H4-00 | Description: Heat roller low temperature detection The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C. |
10 | Description: IMC trouble An abnormality occurs in the IMC. |
16 | Description: Abnormal laser output When the laser output is stopped, HSYNC is detected. |
L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judg |