These results are ranked by popularity.
| Error | |
|---|---|
| H4 00 | Description: Heat roller abnormally low temperature |
| E7 01 | Description: Duplex model memory setup error, memory notdetected error |
| L1 00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) |
| E7 02 | Description: HSYNC not detected. |
| L3 00 | Description: Return is not completed within the specified time. |
The most common error codes.
| Error | |
|---|---|
| H4 00 | Description: Heat roller abnormally low temperature |
| E7 01 | Description: Duplex model memory setup error, memory notdetected error |
| L1 00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) |
| E7 02 | Description: HSYNC not detected. |
| L3 00 | Description: Return is not completed within the specified time. |
| H4 00 | Description: Heat roller abnormally low temperature |
| E7 01 | Description: Duplex model memory setup error, memory notdetected error |
| L1 00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) |
| E7 02 | Description: HSYNC not detected. |
| L3 00 | Description: Return is not completed within the specified time. |
