Toshiba e-Studio 2007 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 2007 Top Searches

These results are ranked by popularity.

Error
E110Description: ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing.
E360Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
C447Description: Fuser unit related service call. While in the READY state, one of the thermistors detected the specified temperature or higher.
CE90Description: Process related service call. Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range.
E725Description: Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor.

Toshiba e-Studio 2007 Common Errors

The most common error codes.

Error
E110Description: ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing.
E360Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
C447Description: Fuser unit related service call. While in the READY state, one of the thermistors detected the specified temperature or higher.
CE90Description: Process related service call. Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range.
E725Description: Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor.
E110Description: ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing.
E360Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
C447Description: Fuser unit related service call. While in the READY state, one of the thermistors detected the specified temperature or higher.
CE90Description: Process related service call. Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range.
E725Description: Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor.