Toshiba e-Studio 457S Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 457S Top Searches

These results are ranked by popularity.

Error
ED11Description: Sideways adjustment motor (M2) home position detection error: The Sideways adjustment motor is not at the home position. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]
E064Description: Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment.
F700Description: Overwrite error
EA25Description: Paper transport jam (after paper stack exit): The finishing tray paper detection sensor detects paper after a stack of paper exits from the finishing tray. [MJ-1101/MJ-1106] Paper transport jam in the Finisher (after paper stack exit): Paper
CC21Description: The detection of the home position of the saddle stitch 3rd transport roller drive motor ends abnormally.

Toshiba e-Studio 457S Common Errors

The most common error codes.

Error
ED11Description: Sideways adjustment motor (M2) home position detection error: The Sideways adjustment motor is not at the home position. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]
E064Description: Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment.
F700Description: Overwrite error
EA25Description: Paper transport jam (after paper stack exit): The finishing tray paper detection sensor detects paper after a stack of paper exits from the finishing tray. [MJ-1101/MJ-1106] Paper transport jam in the Finisher (after paper stack exit): Paper
CC21Description: The detection of the home position of the saddle stitch 3rd transport roller drive motor ends abnormally.
ED11Description: Sideways adjustment motor (M2) home position detection error: The Sideways adjustment motor is not at the home position. [MJ-1101/MJ-1106 (when MJ-6103 is installed)]
E064Description: Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment.
F700Description: Overwrite error
EA25Description: Paper transport jam (after paper stack exit): The finishing tray paper detection sensor detects paper after a stack of paper exits from the finishing tray. [MJ-1101/MJ-1106] Paper transport jam in the Finisher (after paper stack exit): Paper
CC21Description: The detection of the home position of the saddle stitch 3rd transport roller drive motor ends abnormally.