Toshiba e-Studio 5055C Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 5055C Top Searches

These results are ranked by popularity.

Error
EA2DDescription: Paper transport jam in the Finisher (Sub-path sensor) [MJ-1036]
CC80Description: Front alignment motor (M2) abnormality [MJ-1036]Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1107/1108]
F106_7Description: ADI-HDD error: Error caused by reason other than F106_0 to 5 errors.
E580Description: Stop jam at the reverse section: The paper is remaining at the reverse sensor.
CB14Description: Paper holding arm motor abnormality [MJ-1108]

Toshiba e-Studio 5055C Common Errors

The most common error codes.

Error
EA2DDescription: Paper transport jam in the Finisher (Sub-path sensor) [MJ-1036]
CC80Description: Front alignment motor (M2) abnormality [MJ-1036]Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1107/1108]
F106_7Description: ADI-HDD error: Error caused by reason other than F106_0 to 5 errors.
E580Description: Stop jam at the reverse section: The paper is remaining at the reverse sensor.
CB14Description: Paper holding arm motor abnormality [MJ-1108]
EA2DDescription: Paper transport jam in the Finisher (Sub-path sensor) [MJ-1036]
CC80Description: Front alignment motor (M2) abnormality [MJ-1036]Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally. [MJ-1107/1108]
F106_7Description: ADI-HDD error: Error caused by reason other than F106_0 to 5 errors.
E580Description: Stop jam at the reverse section: The paper is remaining at the reverse sensor.
CB14Description: Paper holding arm motor abnormality [MJ-1108]